Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa).

Biobased plastics provide a sustainable alternative to conventional food packaging materials, thereby reducing the environmental impact. The present study investigated the effectiveness of chitosan with varying levels of Moringa oleifera seed powder (MOSP) and tannic acid (TA). Chitosan (CS) biocomposite films with tannic acid acted as a cross-linker, and Moringa oleifera seed powder served as reinforcement. To enhance food packaging and film performance, Moringa oleifera seed powder was introduced at various loadings of 1.0, 3.0, 5.0, and 10.0 wt.%. Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy analyses were performed to study the structure and morphology of the CS/TA/MOSP films. The scanning electron microscopy results confirmed that chitosan/TA with 10.0 wt.% of MOSP produced a lightly miscible droplet/matrix structure. Furthermore, mechanical properties, swelling, water solubility, optical barrier, and water contact angle properties of the film were also calculated. With increasing Moringa oleifera seed powder contents, the biocomposite films' antimicrobial and antifungal activity increased at the 10.0 wt.% MOSP level; all of the observed bacteria [Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Aspergillus niger (A. niger), and Candida albicans (C. albicans)] had a notably increased percentage of growth. The film, with 10.0 wt.% MOSP content, effectively preserves strawberries' freshness, making it an ideal food packaging material.

A Study on the Antibacterial, Antispasmodic, Antipyretic, and Anti-Inflammatory Activity of ZnO Nanoparticles Using Leaf Extract from Jasminum sambac (L. Aiton).

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using plants has grown in significance in recent years. ZnO NPs were synthesized in this work via a chemical precipitation method with Jasminum sambac (JS) leaf extract serving as a capping agent. These NPs were characterized using UV-vis spectroscopy, FT-IR, XRD, SEM, TEM, TGA, and DTA. The results from UV-vis and FT-IR confirmed the band gap energies (3.37 eV and 3.50 eV) and the presence of the following functional groups: CN, OH, C=O, and NH. A spherical structure and an average grain size of 26 nm were confirmed via XRD. The size and surface morphology of the ZnO NPs were confirmed through the use of SEM analysis. According to the TEM images, the ZnO NPs had an average mean size of 26 nm and were spherical in shape. The TGA curve indicated that the weight loss starts at 100 °C, rising to 900 °C, as a result of the evaporation of water molecules. An exothermic peak was seen during the DTA analysis at 480 °C. Effective antibacterial activity was found at 7.32 ± 0.44 mm in Gram-positive bacteria (S. aureus) and at 15.54 ± 0.031 mm in Gram-negative (E. coli) bacteria against the ZnO NPs. Antispasmodic activity: the 0.3 mL/mL sample solution demonstrated significant reductions in stimulant effects induced by histamine (at a concentration of 1 µg/mL) by (78.19%), acetylcholine (at a concentration of 1 µM) by (67.57%), and nicotine (at a concentration of 2 µg/mL) by (84.35%). The antipyretic activity was identified using the specific Shodhan vidhi method, and their anti-inflammatory properties were effectively evaluated with a denaturation test. A 0.3 mL/mL sample solution demonstrated significant reductions in stimulant effects induced by histamine (at a concentration of 1 µg/mL) by 78.19%, acetylcholine (at a concentration of 1 µM) by 67.57%, and nicotine (at a concentration of 2 µg/mL) by 84.35%. These results underscore the sample solution's potential as an effective therapeutic agent, showcasing its notable antispasmodic activity. Among the administered doses, the 150 mg/kg sample dose exhibited the most potent antipyretic effects. The anti-inflammatory activity of the synthesized NPs showed a remarkable inhibition percentage of (97.14 ± 0.005) at higher concentrations (250 µg/mL). Furthermore, a cytotoxic effect was noted when the biologically synthesized ZnO NPs were introduced to treated cells.

Achieving Well-Oriented FAPbI3 Perovskite Photovoltaics by Cyclohexane Modification.

It is essential and challenging to develop green and cost-effective solar cells to meet the energy demands. Solar cells with a perovskite light-harvesting layer are the most promising technology to propel the world toward next-generation solar energy. Formamidinium lead tri-iodide (FAPbI3)-based perovskite solar cells (F-PSCs), with their considerable performance, offer cost-effective solar cells. One of the major issues that the PSC community is now experiencing is the stability of α-FAPbI3 at relatively low temperatures. In this study, we fabricated FAPbI3-PSCs using cyclohexane (CHX) material via a two-step deposition method. For this purpose, CHX is added to the formamidinium iodide:methylammonium chloride (FAI:MACl) solution as an additive and used to form a better FAPbI3 layer by controlling the reaction between FAI and lead iodide (PbI2). The CHX additive induces the reaction of undercoordinated Pb2+ with FAI material and produces an α-FAPbI3 layer with low charge traps and large domains. In addition, the CHX-containing FAPbI3 layers show higher carrier lifetimes and facilitate carrier transfer in F-PSCs. The CHX-modified F-PSCs yield a high champion efficiency of 22.84% with improved ambient and thermal stability behavior. This breakthrough provides valuable findings regarding the formation of a desirable FAPbI3 layer for photovoltaic applications and holds promise for the industrialization of F-PSCs.

Spectroscopic Studies on Structurally Modified Anthraquinone Azo Hydrazone Tautomer: Theoretical and Experimental Approach.

A series of unique four mono-azo substituted anthraquinone analogue were synthesized by using the anthraquinone components in the diazo-coupling technique. The FT-IR, 1H NMR, and HRMS, data were used to confirm the structure of the molecules, and spectroscopic techniques like UV-Vis, and photoluminescence spectroscopy were employed to estimate the photophysical properties of the molecules. The molecular optimized geometry and frontier molecular orbitals were estimated using density functional theory. Further, global chemical reactivity descriptors parameter was theoretically estimated using the value of the highest occupied molecular orbit and lowest unoccupied molecular orbits. The anti-tubercular action of the synthesised dyes were also examined. The results of this biological activity showed that N-isopropyl aniline combined with anthraquinone N-isopropyl aniline had superior anti-tubercular activity when compared to Rifampicin as the standard. As per molecular docking studies, the synthesized compound Q1 showed excellent binding energy (-10.0 kcal/mol) among all compounds against the 3ZXR Protein. These results agreed with our in-vitro anti-TB activity results.

Synergistic Influence of FRET on a High Quantum Yield π- Conjugate Polycarbazole-ZnS Composite Thin Film.

The incorporation of semiconducting materials into the π-conjugate polymer improves the optical, thermal, electrical, and electrochemical properties of optoelectronic devices. In this study, polycarbazole-zinc sulfide (PCZ) composites are synthesized via an in situ polymerization process, and their thin films are produced by spin coating. ZnS enhances the charge transfer qualities of polycarbazoles, which in turn results in better photophysical and electrical characteristics. The PCZ15 thin film has an optical band gap of 2.44 eV, a refractive index of 2.15, and an Urbach energy of 0.44 eV. Relative quantum yield for the PCZ15 was 38.4%, while Förster resonance energy transfer efficiency was 2%. Excellent thermal performance was shown by the PCZ15, which was 37.04% more efficient than the pure polycarbazole with an activation energy of 356 kJ/mol. PCZ15 has an outstanding charge mobility of 54.22 m2/(V s) and a conductivity of 0.298 S/cm. High charge transfer efficiencies were discovered by electrochemical analysis, which had a specific capacitance of 116 Fg-1. These characteristics strongly supported the viability of the PCZ15 thin film as a high-performance polymer-derived composite materials for optoelectronic devices.

Sulfur Nanoparticle-Decorated Nickel Cobalt Sulfide Hetero-Nanostructures with Enhanced Energy Storage for High-Performance Supercapacitors.

Transition-metal sulfides exaggerate higher theoretical capacities and were considered a type of prospective nanomaterials for energy storage; their inherent weaker conductivities and lower electrochemical active sites limited the commercial applications of the electrodes. The sheet-like nickel cobalt sulfide nanoparticles with richer sulfur vacancies were fabricated by a two-step hydrothermal technique. The sheet-like nanoparticles self-combination by ultrathin nanoparticles brought active electrodes entirely contacted with the electrolytes, benefiting ion diffusion and charges/discharges. Nevertheless, defect engineers of sulfur vacancy at the atomic level raise the intrinsic conductivities and improve the active sites for energy storage functions. As a result, the gained sulfur-deficient NiCo2S4 nanosheets consist of good specific capacitances of 971 F g-1 at 2 A g-1 and an excellent cycle span, retaining 88.7% of the initial capacitance over 3500 cyclings. Moreover, the values of capacitance results exhibited that the fulfilling characteristic of the sample was a combination of the hydrothermal procedure and the surface capacitances behavior. This novel investigation proposes a new perspective to importantly improve the electrochemical performances of the electrode by the absolute engineering of defects and morphologies in the supercapacitor field.

Conjugated Polymers-Based Ternary Hybrid toward Unique Photophysical Properties.

The improvement of optical and optoelectronic properties of the individual poly [2-methoxy-5- (2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]-End capped with Dimethyl phenyl (OC1C10-PPV-DMP), and poly (9,9'-di- n -octylfluorenyl-2,7-diyl) (F8) was revealed by blending them in ternary hybrid with optimal ratio (F8/2 wt.% MEH-PPV/2 wt.% OC1C10-PPV-DMP). All individual and optimal ternary solutions were prepared via the solution-blending method followed by depositing them onto glass and ITO substrates using spin-coating technique. The semi-crystalline phase of the ternary hybrid and the strong mixing between the conjugated polymers were evidenced by observing the X-ray diffraction patterns that related to F8 into the hybrid diffractogram. The optical and optoelectronic properties of all prepared thin films were investigated in terms of absorption and emission spectra, Commission International d'Eclairage (CIE) coordinates, and current-voltage (I-V) characterizations. Emission peaks at the entire range of visible spectrum can be revealed from the ternary hybrid of the three individual conjugated polymers, producing white emission as evidenced from the emission spectrum and CIE coordinates of the hybrid. Among all fabricated organic light-emitting diodes (OLEDs) devices, the ternary hybrid-based-OLED revealed the best performance in terms of current and turn-on voltage.

Amplified Spontaneous Emission from Thermally Evaporated High-Quality Thin Films of CsPb(Br1-xYx)3 (Y = I, Cl) Perovskites.

As a wavelength-tunable lasing material, perovskites are now generating a lot of scientific attention. Conventional solution-processed CsPbX3 perovskite films sometimes suffer unavoidable pinhole defects and poor surface morphology, severely limiting their performance on amplified spontaneous emission (ASE) and lasing application. Herein, a thermal evaporation approach is explored in our work to achieve a uniform and high-coverage CsPb(Br1-xYx)3 (Y = I, Cl) perovskites polycrystalline thin film. The ASE of these films was studied using a picosecond laser system. The ASE profile increases rapidly over the narrow peak in relation to the laser pump intensity, confirming the development of stimulated emission. ASE began when the energy density threshold was reached and ranged between 25 and 170 µJ/cm2 per pulse for perovskite materials when replacing I with Br and then Cl. This work emphasizes the notable optical properties of high-quality perovskite thin films, leading to possible accessible uses in optoelectronic applications.

Photophysical Characteristics of Multicolor Emitting MDMO-PPV-DMP/ZnO Hybrid Nanocomposites.

The tuning of photophysical properties of the poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene]-end capped with dimethylphenyl (DMP), MDMO-PPV-DMP, was achieved by incorporation of ZnO NPs with various contents. Hybrid nanocomposites of MDMO-PPV-DMP with ZnO NPs were prepared by solution blending method and then deposited onto glass substrates. The structural properties of the hybrid nanocomposites samples were characterized using X-ray diffraction, FTIR, and FE-SEM, while their optical properties were extracted from the absorption and photoluminescence spectra. The energy band gap, energy tail, steepness parameter, and CIE chromatic coordinates were tuned by increase the content of ZnO NPs into the polymer matrix. The ZnO NPs incorporation assists the emission wavelength shift and multicolor emitting from the hybrid nanocomposites.

Controlling the Emission Spectrum of Binary Emitting Polymer Hybrids by a Systematic Doping Strategy via Förster Resonance Energy Transfer for White Emission.

Tuning the emission spectrum of both binary hybrids of poly (9,9'-di-n-octylfluorenyl-2,7-diyl) (PFO) with each poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly[2-methoxy-5-(3,7-dimethyl-octyloxy)-1,4-phenylenevinylene] end-capped with Dimethyl phenyl (MDMO-PPV-DMP) by a systematic doping strategy was achieved. Both binary hybrid thin films of PFO/MEH-PPV and PFO/MDMO-PPV-DMP with various weight ratios were prepared via solution blending method prior to spin coating onto the glass substrates. The conjugation length of the PFO was tuned upon addition of acceptors (MEH-PPV or MDMO-PPV-DMP), as proved from shifting the emission and absorption peaks of the binary hybrids toward the acceptor in addition to enhancing the acceptor emission and reducing the absorbance of the PFO. Förster resonance energy transfer (FRET) is more efficient in the binary hybrid of PFO/MDMO-PPV-DMP than in the PFO/MEH-PPV. The efficient FRET in both hybrid thin films played the major role for controlling their emission and producing white emission from optimum ratio of both binary hybrids. Moreover, the tuning of the emission color can be attributed to the cascade of energy transfer from PFO to MEH-PPV, and then to MDMO-PPV-DMP.

Enhancement of Light Amplification of CsPbBr3 Perovskite Quantum Dot Films via Surface Encapsulation by PMMA Polymer.

Photonic devices based on perovskite materials are considered promising alternatives for a wide range of these devices in the future because of their broad bandgaps and ability to contribute to light amplification. The current study investigates the possibility of improving the light amplification characteristics of CsPbBr3 perovskite quantum dot (PQD) films using the surface encapsulation technique. To further amplify emission within a perovskite layer, CsPbBr3 PQD films were sandwiched between two transparent layers of poly(methyl methacrylate) (PMMA) to create a highly flexible PMMA/PQD/PMMA waveguide film configuration. The prepared perovskite film, primed with a polymer layer coating, shows a marked improvement in both emission efficiency and amplified spontaneous emission (ASE)/laser threshold compared with bare perovskite films on glass substrates. Additionally, significantly improved photoluminescence (PL) and long decay lifetime were observed. Consequently, under pulse pumping in a picosecond duration, ASE with a reduction in ASE threshold of ~1.2 and 1.4 times the optical pumping threshold was observed for PQDs of films whose upper face was encapsulated and embedded within a cavity comprising two PMMA reflectors, respectively. Moreover, the exposure stability under laser pumping was greatly improved after adding the polymer coating to the top face of the perovskite film. Finally, this process improved the emission and PL in addition to enhancements in exposure stability. These results were ascribed in part to the passivation of defects in the perovskite top surface, accounting for the higher PL intensity, the slower PL relaxation, and for about 14 % of the ASE threshold decrease.

Tuning Photophysical Properties of Donor/Acceptor Hybrid Thin- Film via Addition of SiO2/TiO2 Nanocomposites.

The influence of SiO2/TiO2 nanocomposites (STNCs) content on non-radiative energy transfer (Förster-type) from poly (9,9'-dioctylfluorene-2,7-diyl) (PFO) to poly [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) using steady-state and time-resolved photoluminescence spectroscopies was investigated at room temperature. The improved energy transfer from PFO to MEH-PPV upon an increment of the STNCs was achieved by examining absorbance, emission (PL) and photoluminescence excitation (PLE) spectra. The shorter values of the quantum yield (φDA) and lifetime (τDA) of the PFO in the hybrid thin films compared with the pure PFO, indicating efficient energy transfer from PFO to MEH-PPV with the increment of STNCs in the hybrid. The energy transfer parameters can be tuned by increment of the STNCs in the hybrid of PFO/MEH-PPV. The Stern-Volmer value (kSV), quenching rate value (kq), Förster radius (R0), distance between the molecules of PFO and MEH-PPV (RDA), energy transfer lifetime (τET), energy transfer rate (kET), total decay rate of the donor (TDR), critical concentration (Ao), and conjugation length (Aπ) were calculated. The gradually increasing donor lifetime and decreasing acceptor lifetime, upon increasing the STNCs content, prove the increase in conjugation length and meanwhile enhance in the energy transfer.

Achieving Optical Gain of the CsPbBr3 Perovskite Quantum Dots and Influence of the Variable Stripe Length Method.

High-quality inorganic cesium lead halide perovskite quantum dot (CsPbBr3 PQD) thin films were successfully deposited directly from a powdered source and used as an active laser medium following the examination of their distinctive surface and structural properties. To determine the suitability of the CsPbBr3 PQDs as an active laser medium, amplified spontaneous emission (ASE) and optical gain properties were investigated under picosecond pulse excitation using the variable stripe length (VSL) method. The thin film of CsPbBr3 PQDs has exhibited a sufficient value of the optical absorption coefficient of ∼0.86 × 105 cm-1 near the band edge and a direct band gap energy E g ∼2.38 eV. The samples showed enhanced emission, and ASE was successfully recorded at a low threshold. The light emitted from the edge was observed near 2.40 and 2.33 eV for the stimulated emission (SE) and ASE regimes, respectively. The nonradiative decay contributes excitons dominant over biexcitons in the sample edge emission above the ASE threshold, making it practical for CsPbBr3 PQDs to be used as optical gain media without undergoing repeated SE processes above the threshold over long periods. A high value of the optical gain coefficient was recorded at 346 cm-1.

Single-Source Thermal Evaporation Growth and the Tuning Surface Passivation Layer Thickness Effect in Enhanced Amplified Spontaneous Emission Properties of CsPb(Br0.5Cl0.5)3 Perovskite Films.

High-quality inorganic cesium lead halide perovskite CsPb(Br0.5Cl0.5)3 thin films were successfully achieved through evaporation of the precursors and deposition sequentially by a single-source thermal evaporation system. The different melting points of the precursors were enabled us to evaporate precursors one by one in one trip. The resulting films through its fabrication were smooth and pinhole-free. Furthermore, this technique enabled complete surface coverage by high-quality perovskite crystallization and more moisture stability oppositely of that produce by solution-processed. Then the perovskite films were encapsulated by evaporated a polymethyl methacrylate (PMMA) polymer as a specialized surface passivation approach with various thicknesses. The blue emission, high photoluminescence quantum yield (PLQY), stable, and low threshold of amplified spontaneous emission (ASE) properties of CsPb(Br0.5Cl0.5)3 films in the bulk structure at room temperature were achieved. The effects of the surface-passivation layer and its thickness on the optical response were examined. Detailed analysis of the dependence of ASE properties on the surface passivation layer thickness was performed, and it was determined this achieves performance optimization. The ASE characteristics of bare perovskite thin film were influenced by the incorporation of the PMMA with various thicknesses. The improvement to the surface layer of perovskite thin films compared to that of the bare perovskite thin film was attributed to the combination of thermal evaporation deposition and surface encapsulation. The best results were achieved when using a low PMMA thickness up to 100 nm and reducing the ASE threshold by ~11 µJ/cm2 when compared with free-encapsulation and by ~13 µJ/cm2 when encapsulation occurs at 200 nm or thicker. Compared to the bare CsPb(Br0.5Cl0.5)3, ASE reduced 1.1 times when the PMMA thickness was 100 nm.

Ultra-Stable Polycrystalline CsPbBr3 Perovskite-Polymer Composite Thin Disk for Light-Emitting Applications.

Organic-inorganic halide organometal perovskites have demonstrated very promising performance in optoelectronic applications, but their relatively poor chemical and colloidal stability hampers the further improvement of devices based on these materials. Perovskite material engineering is crucial for achieving high photoluminescence quantum yields (PLQYs) and long stability. Herein, these goals are attained by incorporating bulk-structure CsPbBr3, which prevents colloidal degradation, into polymethyl methacrylate (PMMA) polymer in thin-disk form. This technology can potentially realize future disk lasers with no optical and structural contributions from the polymer. The polycrystalline CsPbBr3 perovskite particles were simply obtained by using a mechanical processing technique. The CsPbBr3 was then incorporated into the PMMA polymer using a solution blending method. The polymer enhanced the PLQYs by removing the surface trap states and increasing the water resistance and stability under ambient conditions. In our experimental investigation, the CsPbBr3/PMMA composites were extraordinarily stable and remained strongly luminescent after water immersion for three months and air exposure for over one year, maintaining 80% of their initial photoluminescence intensity. The CsPbBr3/PMMA thin disk produced amplified spontaneous emission for a long time in air and for more than two weeks in water.

Fabrication of Thin Films from Powdered Cesium Lead Bromide (CsPbBr3) Perovskite Quantum Dots for Coherent Green Light Emission.

High-quality thin films were obtained directly by spin-coating glass substrates with suspensions of powdered cesium lead bromide (CsPbBr3) perovskite quantum dots (PQDs). The structural properties of the films were characterized via transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis, and atomic force microscopy (AFM). The crystal structure of the CsPbBr3 PQDs was unique. The optical behavior of the CsPbBr3 PQDs, including absorption and emission, was then investigated to determine the absorption coefficient and band gap of the material. The CsPbBr3 PQDs were evaluated as active lasing media and irradiated with a pulsed laser under ambient conditions. The PQDs were laser-active when subjected to optical pumping for pulse durations of 70-80 ps at 15 Hz. Amplified spontaneous emission (ASE) by the CsPbBr3 PQD thin films was observed, and a narrow ASE band (∼5 nm) was generated at a low threshold energy of 22.25 µJ cm-2. The estimated ASE threshold carrier density (n th) was ∼7.06 × 1018 cm-3. Band-gap renormalization (BGR) was indicated by an ASE red shift and a BGR constant of ∼27.10 × 10-8 eV. A large optical absorption coefficient, photoluminescence (PL), and a substantial optical gain indicated that the CsPbBr3 PQD thin films could be embedded in a wide variety of cavity resonators to fabricate unique on-chip coherent light sources.

Triplet Energy Transfer Mechanism of Ternary Organic Hybrid Thin Films of PFO/MEH-PPV/CsPbBr3 Perovskite Quantum Dots.

The triplet energy transfer mechanism of novel poly(9,9-di-n-octylflourenyl-2,7-diyl) (PFO)/poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV)/CsPbBr3 perovskite quantum dot (PQD) hybrid thin films was comprehensively investigated. The concentrations of PFO and MEH-PPV in all the specimens were fixed, while the PQD content was varied with various weight ratios and premixed by a solution blending method before it was spin-coated onto glass substrates. The triplet non-radiative Förster resonance energy transfers (FRETs) in the PFO/MEH-PPV/PQDs ternary blend, the dual FRET from PFO to both PQDs and MEH-PPV, and the secondary FRET from PQDs to MEH-PPV were observed. The values of the Förster radius (Ro) of FRET from PFO to MEH-PPV in the presence of various PQD contents (Case I) increased from 92.3 to 104.7 Å, and they decreased gradually from 68.0 to 39.5 Å for FRET from PFO to PQDs in the presence of MEH-PPV (Case II). These Ro values in both cases confirmed the dominance of FRET in ternary hybrid thin films. Upon increasing the PQD content, the distance between the donor and acceptor molecules (RDA) and the conjugation length (Aπ) in both cases gradually decreased. The small values of Ro, RDA, and Aπ with a decrease in the energy transfer lifetime (τET) due to an increase in the PQD contents in both Cases I and II confirmed the efficient FRET in the hybrid. To prevent intermolecular transfer in PFO, the concentrations of MEH-PPV (Case I) and PQDs (Case II) should be decreased to a range of 0.57-0.39 mM and increased in the range of 1.42-7.25 mM.

Improving Photophysical Properties of White Emitting Ternary Conjugated Polymer Blend Thin Film via Additions of TiO2 Nanoparticles.

The effect of TiO2 nanoparticles on the photophysical properties of ternary conjugated polymer (CP) blends of poly(9,9-dioctylfluorene-2,7-diyl) (PFO), poly 9,9-dioctylfluorene-alt-benzothiadiazole (F8BT) and poly(2-methoxy-5(2-ethylhexyl)-1,4 -phenylenevinylene (MEH-PPV) thin films was investigated. This ternary blend used a fixed amount of PFO as the donor with MEH-PPV and F8BT in various ratios as the acceptors. The solution-blending method and the spin-coating technique were used to prepare the blends and the thin films, respectively. Through efficient Förster Resonance Energy Transfer (FRET), the desired white emission was achieved with PFO/0.3 wt.% F8BT/0.5 wt.% MEH-PPV ternary blend thin film. Additions of nanoparticles up to 10 wt.% dramatically intensified the white emission which then dimmed at higher contents due to agglomerations. The current density-voltage characteristics of the nanocomposite thin films exhibited dependency on the content and distributions of the nanoparticles. Finally, a possible underlying mechanism for the intensification of emission is proposed.

Effect of Donor-Acceptor Concentration Ratios on Non-Radiative Energy Transfer in Zero-Dimensional Cs4PbBr6 Perovskite/MEH-PPV Nanocomposite Thin Films.

Composite materials with different concentration ratios of a hybrid of zero-dimensional (0-D) Cs4PbBr6 perovskite, which acts as a donor (D), and poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), which acts as an acceptor (A), were successfully prepared via a solution blending method prior to being deposited onto glass substrates by a spin-coating technique. The influence of acceptor content on the structural, optical, and energy transfer properties of the donor was investigated. The perovskite nanocrystals formed thin films without any chemical interactions within a matrix of MEH-PPV in the blend. The possibility of dipole-dipole (non-radiative) energy transfer from the 0-D Cs4PbBr6 to the MEH-PPV was proven. The energy transfer parameters such as Ro (critical distance of the energy transfer), kapp (apparent quenching constant), ∅DA (quantum yield of D in the presence of A), τDA (lifetime of D in the presence of A), PDA (probability of energy transfer), η (efficiency of energy transfer), RDA (energy transfer radius), kET (energy transfer rate constant), TDR (total decay rate), Ao (critical concentration of A), and Aπ (conjugation length) were calculated based on the absorption and emission measurements.

Influence of SiO2/TiO2 Nanocomposite on the Optoelectronic Properties of PFO/MEH-PPV-Based OLED Devices.

The influence of SiO2/TiO2 nanocomposites on the performance of organic light-emitting diodes (OLEDs) based on poly(9,9'-di-n-octylfluorenyl-2,7-diyl) (PFO) and various amounts of poly(2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV) was investigated. Prior to the fabrication of the OLEDs on indium-tin oxide (ITO) substrates, the hybrids of PFO/MEH-PPV, in the presence and absence of the SiO2/TiO2 nanocomposites, were prepared via the solution blending technique. Improvement of the performances of the devices in the presence of the SiO2/TiO2 nanocomposites was detected. The existence of the SiO2/TiO2 nanocomposites led to better charge carrier injection and, thus, a significant reduction in the turn-on voltage of the devices. The enhancement of MEH-PPV electroluminescence peaks in the hybrids in the presence of SiO2/TiO2 nanocomposites is not only a result of the Förster resonance energy transfer, but also of hole-electron recombination, which is of greater significance. Moreover, the existence of the SiO2/TiO2 nanocomposites led to a shift of the CIE chromaticity coordinates of the devices.